Products
	Tramec
	EP SERIES – STANDARD PLANETARY GEARBOXES
	* Backlash of between 15 arc min to 20 arc min * The RE series is available in 5 sizes (Diameter of 55mm,    72mm, 90mm, 115 and 140mm) * Ratio from 3 to 100 with 1 and 2 reduction stages * High input speed of max 5,000rpm * 2 output shaft diameters to select from, catering to    different output torque required * 2 type of output flange, round(A or T) or square(Q) type to    select * Compatible motor mounting flange available to your motor * Housing are made of special nitride steel to assure    strength, high reliability and long life * Shafts are made of hardened and tempered alloy steel * Gears are made of case hardened and tempered alloy    steel, with ground toothing * Bearings of high quality and suitably sized to assure long    life and noiseless working
	REP SERIES – HIGH PRECISION PLANETARY GEARBOXES
	* Backlash of between 4 arc min to 8 arc min * The REP series is available in 4 sizes (Diameter of 60mm,    80mm, 115mm and 140mm) * Ratio from 3 to 343 with 1, 2 or 3 reduction stages * 2 to 3 output shaft diameters to select from, catering to    different output torque required * 2 type of output flange, round(FLT) or square(FLQ) type    to select * Compatible motor mounting flange available to suit your    motor * Housing are made of special nitride steel to assure    strength, high reliability and long life * Shafts are made of hardened and tempered alloy steel * Gears are made of casehardened and tempered alloy steel,   with ground toothing * Bearings of high quality and suitably sized to assure long    life and noiseless working
	WORM GEARBOXES – X AND H SERIES
	The worm reduction gears come in two series: X and H. The series X, featuring a worm and worm wheel set, is available in versions XA with shaft and XF-XC with mounting provisions for motor. Version XF (bell housing + coupling) offers great versatility to suit a broad range of applications and provides higher efficiency than the compact line XC, where the emphasis is on space efficiency. Series H offers the same features as series X with an added plus: a spur gear pre-stage at the input end provides higher performance and a broader range of ratios than the X series. Frame sizes 110 and 90 feature a cast-iron housing cast enbloc, whereas smaller sizes use die-cast aluminium housings. The worm shaft is manufactured from casehardened and hardened alloy steel and ground-finished. The worm wheel has a cast iron hub with cast bronze insert. Hollow output shaft is supplied as standard. Broad range of options available: second input, backstop, output flange, single or double extension output shaft, shrink disc coupling, torque limiter with through cable, torque arm.
	BEVEL HELICAL GEARBOXES
	* Built in 9 sizes with 2 reduction stages and in 8 sizes with 3    reduction stages . * Three input types are available : projecting input shaft,    pre-engineered motor coupling (bell and joint) and pre-    engineered COMPACT motor coupling. (Sizes 56 and 63    excluded). the three input types can be mounted either    vertically and/or horizontally. * Gear unit casing in aluminium alloy GAlSi9Cu1 UNI7369/3    (56-63), in engineering cast iron, EN GJL 200 UNI EN 1561    (71-180) or spheroidal graphite cast iron EN GJS 400-15 U    UNI EN 1563 (200-225), it is ribbed internally and externally    to guarantee rigidity. It is machined on all surfaces for easy    positioning. The single lubrication chamber guarantees    improved heat dissipation and improved lubrication of all    the internal components. * Gears are built in casehardened compound steel and have    undergone case-hardening and quench-hardening    treatments. In particular, the first reduction stage consists    of two GLEASON spiral bevel gears with precision ground    profile, in 16CrNi4 or 18NiCrMo5 UNI7846 case-hardened    and quench-hardened steel. * The use of high-quality tapered roller bearings on all shafts    (except for the input sleeve on the pre-engineered compact    motor coupling, which is supported by angular ball    bearings) ensures long life and enables very high external    radial and axial loads. * The standard hollow output shaft made of steel (shrink disc    available on request), the option of mounting an output    flange on one or both sides and the possipility of mounting    a backstop device make these gear units extremely    versatile and easy to install.
	CONFIGURATION
	Other ranges of gearboxes available

© 2007 I-Motion. All rights reserved.